Yes, if you're currently using the Air Lift 1000 Air Helper Springs for Coil Springs # AL81560 you can remove those when you install the SuperCoils Custom Suspension Coils # SSC-11 on the front of your 2000 Workhorse P32 Chassis. view full answer...
For your 2004 Monaco Monarco Class A RV you will need 13" to 15" of extension. The best option is going to be the Wheel Masters 2-Hose Inflation Kit - 22-1/2" Dually - Hub Mount item # WM8005 you were looking at. All of our two tire kits come with the mounting brackets. view full answer...
The direct replacement step for your 2005 Holiday Rambler P Series Workhorse would be Replacement Steps, Motor, and Switch for Kwikee RV Electric Steps Item # LC3722617. view full answer...
The correct Roadmaster Front Anti-Sway Bar and Bushing Kit for a 2000 Fleetwood Flair 25Y on Workhorse P Series Chassis is part # RM-1109-116. view full answer...
Manufacturers do not list the door handle locks used so you would need to remove the door handle lock from the entry door of your 2001 R-Vision Trail-Lite M-241 Motorhome and measure the cutout hole to find the size needed. For example the Bauer Products Motorhome Door Lock - Black # BA64FR requires cutout hole of 5-1/4" wide x 4-1/2" tall and a door thickness of 1-1/4" to 1-1/2" thick to install. view full answer...
In order to add an anti-sway bar to the front of your 1995 Chevrolet P30 chassis, you will want to use the Roadmaster Anti-Sway Bar and Bushing Kit for Motor Homes part # RM-1109-116. The anti-sway bar will help with side to side movement, driver fatigue, and shifting cargo. It is made right here in the U.S.A. and comes with a 1-year warranty. Unfortunately, there is not an anti-sway bar for the rear of your P-30 at this time.
If you are also looking to add a steering stabilizer then I... view full answer...
In order to find the correct replacement converter section for a panel you'll need to know both the make and model. If it's a Magnetek then we do have a few options but only for 6300 series models, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part # PD4645V which has a 45 amp output.
If you have a different model, please let me know what that is and I'd be happy to see if we have another option for you. view full answer...
Roadmaster steering stabilizer # RM-RSSCP30 fits both the 2000 Workhorse P30 and P32 chassis! It is intended for models that came with an OEM dampener.
If yours does not have an OEM dampener you would use # RM-RBK3-RSSP30 and it also fits both the P30 and P32 chassis. view full answer...
The correct steering stabilizer for a 2002 Safari Trek 26 Motorhome on Workhorse P Series Chassis is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets part # RM-RBK3-RSSP30 so long as you don't have a factory steering dampener. view full answer...
To replace your Kwikee Series 32 903206000 RV steps you'll need the Kwikee Electric RV Step Complete Assembly # LC372261. This kit will come with everything you need; steps, motor, switch kit, and controller to completely replace your outdated RV steps. view full answer...
A product like the Timbren front-axle Suspension Enhancement System # TGMFP30W is intended to provide support to a front suspension that is in good working order but that needs some help when handling a heavy front-end load like a snowplow. Since your suspension could be over 15 years old, if you are finding it sagging without an extra load like a plow then you might want to have it checked out by a qualified shop to ensure all is well.
If so, then the Timbrens will give you extra support... view full answer...
For your 1998 Workhorse P30 with a factory stabilizer the Roadmaster Reflex Steering Stabilizer # RM-RSSCP30 is a confirmed fit and is designed to replace the factory dampener and use the factory hardware of your RV. view full answer...
I have a great solution for you that will not require you to lift your food truck. I recommend the Timbren Rear Suspension Enhancement System item # TWRW22.These hollow rubber springs have an 8,600 lbs capacity and sit above the rear axle to help stabilize and level your food truck. They work independently from side-to-side to minimize sway and help compensate for off-center loads. We have had other customers, with food trucks, use these successful and write us back.
We also have a set... view full answer...
The steering stabilizer that you need is Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Motor Homes part # RM-RBK3-RSSP30 for the 1996 Winnebago Brave. This steering Stabilizer fits Winnebago Brave model years 1981-1999. The Steering Stabilizer part # RM-RSSCP30 that you referenced is a fit for various other motor homes but does not fit the Winnebagos. view full answer...
I confirmed with my contact at Superchips that their Flashpaq F5 Performance Tuner # SU2845 is a confirmed fit on the 2005 8.1L GM power plant in your Workhorse. Do note this tuner is not legal for use in California. view full answer...
Yes, the Diamond Dual USB Charging Station # DG61031VP will work to charge two USB-connected devices including an Android phone. Each of the two USB outlets provides 2.1-amps of charging current.
If you prefer a charging station with both two USB connections and a standard 12V outlet you can use part # DG61023VP. view full answer...
I do have suspension enhancement options for a 2002 Workhorse P42 Chassis but there are no air bags available unfortunately. Instead, you can use the Timbren Rear Suspension Enhancement System. The correct one will be based off the suspension. The part # TGMRP30MH is for models with bump stop over u-bolt pad and part # TGMRP30 is for models with bump stop on the frame. These options all work well to provide additional support. view full answer...